NatureWood® (ACQ) &
NatureWood® CA
Preservative Retention
NatureWood (CA) Minimum Preservative Retention* Requirements
Above Ground - General Use ................................................................................................... 0.06 (pcf)
Ground Contact & Fresh Water - General Use ..................................................................... 0.15 (pcf)
Ground Contact - Critical Structures Foundation Use. Salt water splash zones ........ 0.31 (pcf)
NatureWood (ACQ) Minimum Preservative Retention* Requirements
Above Ground - General Use ................................................................................................... 0.15 (pcf)
Ground Contact & Fresh Water - General Use ..................................................................... 0.40 (pcf)
Ground Contact - Critical Structures Foundation Use. Salt water splash zones ......... 0.60 (pcf)
* Retention is expressed in pounds of preservative per cubic foot of wood.
IMPORTANT: Treated Wood End Use Information
The two most common service conditions for treated wood are “Above Ground Use” (UC3B) and “Ground Contact Use” (UC4A). It is important when specifying Above Ground or Ground Contact treated wood products that the intended end use application for the treated wood is determined. When using treated wood in “close proximity” to the ground or in applications in or around fresh water areas, it is recommended that all treated wood products used be treated to a “Ground Contact” preservative retention level. Examples for “close ground proximity” are ground level deck joists and beams or surface decking, joists and beams subject to frequent wetting from moisture sources such as swimming pools, hot tubs and air conditioning units. Examples for fresh water areas are stationary and floating dock platforms, dock joists and beams subject to water immersion or frequent wetting from wind, waves, water level changes or other factors.